- Contact Person : Ms. Xiao Chris
- Company Name : Guangzhou Great Power Energy & Technology Co., Ltd.
- Tel : 86-20-61981231
- Fax : 86-20-61981111
- Address : Guangdong,Guangzhou,912 Xicun Section, Shiliang Road, Shawan, Panyu, Guangzhou, China
- Country/Region : China
- Zip : 511483
1.5V 1200mAh AAA / FR03 / LR03 / L92 / R03/ 10440 primary lithium iron battery, LiFeS2 battery cells, lithium battery for camera
1. Specification
No. | Items | Specification |
1 | Nominal Voltage | 1.70V ~1.86V |
2 | Impedance | ≤450mΩ |
3 | Typical Capacity(100mA) | 1100 ±50 mAh |
4 | Working Voltage | 1.30V at 350mA discharge rate |
5 | Max. Discharge Current | 1000 mA continuous |
6 | Discharge Cut-off Voltage | 0.80V |
7 | Volume | 3.8 cubic centimeters |
8 | Weight | Approx. 6.8~7.5 g |
9 | Lithium Content | Less than 0.5 gram per cell |
10 | Dimensions | Diameter: 10.0±0.5 mm |
Height: 43.9±0.6mm | ||
11 | Operating Temp. | -20 °C to 60 °C |
12 | Storage Temp. | -20 °C to 40 °C |
13 | Storage Humidity | ≤75 % |
14 | Shell Life | 5 Years |
2. Typical Discharge Curve
3. Test Conditions and Performance
3.1 Measuring Instrument or Apparatus
3.1.1 Dimension Measuring Instrument
The dimension measurement shall be implemented by calipers with equal or more precision scale of 0.01 mm.
3.1.2 Voltmeter
Standard class specified in the national standard or more sensitive class having inner impedance more than 10 kΩ/V.
3.1.3 Ammeter
Standard class specified in the national standard or more sensitive class. Total external resistance including ammeter and wire is less than 0.01Ω.
3.1.4 Standard Test Conditions
Unless other defined, test and measurement shall be done under temperature of 20±5°C and relative humidity of 45~85%. If it is judged that the test results are not affected by suchconditions, the tests may be conducted at temperature 10~30°C and humidity 25~85%RH.
3.2 Mechanical Characteristics
No. | Item | Test Method | Criteria |
1 | Impact | A 15.8 mm diameter bar is vertically placed across the centre of the sample cell. A 9.1 kg mass is dropped from a height of 61cm onto the sample. | No explosion, No fire |
2 | Vibration | Freq: 10~55hz; Amp: 2mm; Three directions; total 90 min | No leakage, No explosion, no fire 0.02V total maximum OV changes |
3 | Crush | A sample cell is to be crushed between two flat surfaces. Force: 32mm diameter piston; Max pressure: 17.2MPa; Max force: 13KN; Released when the max pressure obtained. | No explosion, No fire |
3.3 Environmental test
No. | Item | Test Conditions | Criteria |
1 | Thermal test | Fresh batteries, store at 70 deg. C for 4hs; 20 deg. C for 2hs; -20 deg. C for 4hs; 20 deg. C for 2hs. All cycled 5 times | No leakage No explosion; No fire |
2 | Heating test | Fresh battery is heated in an oven. The rate of temperature raised: 5±2°C per minute; Max. temperature 150±2°C remaining for 10 minutes. | No explosion; No fire |
3 | Drop test | Fresh batteries; Height: 1m, 6 times; Each direction two times; Concrete floor | No leakage; No explosion; No fire |
3.4 Visual inspection
There shall be no such defect as scratch, flaw, crack, and leakage, which may adversely affect commercial value of cell.
4. Drawing (unit: mm(inches) )
1.5V 1200mAh AAA / FR03 / LR03 / L92 / R03/ 10440 primary lithium iron battery, LiFeS2 battery cells, lithium battery for camera
